Your home deserves wiring that's safe and up to code, and so does every commercial property and rental unit in the area. Conway Electrical Company handles the full range of electrical work for homeowners, landlords, property managers, and businesses across Conway and Faulkner County. From a dead outlet to a full panel upgrade or whole-home rewire, we scope the job on the call and get it scheduled.
We believe in clear communication from the first call to the final test. You know what the work involves, what it costs, and what to expect before anyone shows up at the door.
Schedule it. We wire it. You're powered.
Call (501) 536-6282 for a quote.
A flickering light and a full rewire start the same way: figuring out exactly what is happening and why. When you call with a symptom, we ask the right questions on the phone so we arrive prepared. Flickering lights, dead outlets, a breaker that keeps tripping, a burning smell near the panel or an outlet, sparks, or a section of the house with no power at all, each of those points somewhere specific in the system and each one gets a proper diagnosis before any work starts.
A service visit covers the full circuit path: the panel, the wiring, the outlet or switch, and the grounding. Where GFCI or AFCI protection is missing or has failed, we address it as part of the repair. Arc-fault and ground-fault breakers are not just code items, they are the difference between a nuisance trip and a wiring fire. You get a plain answer on repair versus upgrade so you can make an informed decision before the bill starts.
Call and we'll get you back to full power.
The wiring around here has its own patterns, and older panels in Conway-area homes are one of the more common conversations we have. A panel that was sized for the electrical load of thirty years ago may not be keeping up with today's demands. Air conditioning, home offices, EV chargers, and large appliances all draw power that older 100-amp services were never designed to carry. When a panel runs out of capacity, the symptoms show up as tripped breakers that will not reset, buzzing from the breaker box, or a burning smell near the panel.
A panel upgrade starts with a load calculation to confirm what the service actually needs to carry. From there, the work covers the new panel, the service entrance, the meter connection, and every circuit that feeds back into it. Where a subpanel makes more sense for an outbuilding or an addition, we scope that as part of the same conversation.
Call now and we'll set the appointment.
Getting your electrical problem handled starts with a quick call. outlet added to a room, a GFCI outlet replaced in a bathroom or kitchen, a dimmer switch installed, or a dedicated 240-volt circuit run for a dryer, range, or refrigerator, these are the kinds of jobs we do for homeowners and property managers throughout the area.
Dedicated circuits matter more than most people realize. A washing machine, a chest freezer, or a large window unit on a shared circuit is a recipe for tripped breakers and potential wiring damage. We run the circuit from the panel, confirm the outlet type and amperage match the appliance, and leave the work clean. USB outlets, AFCI-protected outlets for older bedroom circuits, and outdoor weatherproof outlets for patios or garages are all part of the same installation work.
Landlords and property managers call us regularly for rental unit turnover work, code violation repairs, and outlet or switch replacements across multiple units. With a local company, a question about the work gets a straight answer. We take pride in the electrical work we leave behind, whether that is a single outlet or a full unit inspection.
Lighting installation covers more ground than most people expect. Inside, we handle recessed LED lighting, fixture replacements, under-cabinet wiring, and the switch or dimmer work that goes with it. Outside, the job often includes security lighting, motion-sensor fixtures, landscape lighting runs, and weatherproof outlet installation for covered patios or exterior walls.
Ceiling fan installation is its own skill set. Mounting a fan to a ceiling box that was only rated for a light fixture is a common problem we find and correct. We confirm the box, run the wiring, and wire the wall switch correctly so the fan and the light operate independently when that is what the job calls for.
When the power goes out, or when a renovation uncovers wiring that should have been replaced a decade ago, the scope of the project becomes clear fast. Older Conway homes sometimes still have knob-and-tube wiring or aluminum branch circuits. Both create real safety concerns and both require a methodical approach: mapping the existing circuits, determining what can be retained, and replacing what cannot.
Whole-home rewiring, rewiring a rental property, and wiring for additions and remodels all fall under the same discipline. We handle basement circuits and sump-pump wiring, garage and workshop wiring, bathroom exhaust fan circuits, and dedicated circuits for hot tubs and pool pumps. The electrical side of a pool or hot tub installation involves the dedicated circuit, the disconnect, and the grounding work. That is the scope we cover.
Home additions and finished basements need new circuits run from the panel, and the panel has to have the capacity to carry them. If it does not, that conversation happens before the walls go up. We'll sort the wiring and clean up after.
A Level 2 EV charger at home runs on a dedicated 240-volt circuit, and that circuit has to be sized correctly for the charger's amperage draw. The work involves running the circuit from the panel to the garage or parking area, installing the outlet or hardwired connection, and confirming the panel has the capacity to carry the added load. If the panel is already near its limit, a panel upgrade becomes part of the conversation before the charger goes in.
Faulkner County's four-season climate puts real demands on residential and commercial electrical systems. Hot summers push cooling loads hard, and severe weather, including thunderstorms, tornadoes, and ice storms, makes backup power and surge protection practical priorities rather than optional upgrades. These are the jobs that come up most often in this area, and we handle all three.
Arkansas summers push electrical systems hard. Running central air conditioning through the hottest months of the year adds sustained load to a panel that may already be carrying more than it was designed for. Older Conway neighborhoods have a share of homes with undersized panels and service entrances that have not been touched since the house was built. When the demand outgrows the supply, the panel is where the work starts. We handle the full service-entrance and meter upgrade as part of a panel replacement, not as a separate add-on.
Ice storms and severe thunderstorms knock out power across Faulkner County on a regular basis, and a generator that is not properly wired into the home's electrical system is not much use when the grid goes down. The electrical work for a backup generator centers on the transfer switch, which isolates the home from the utility line and connects the generator safely. We handle the transfer switch installation, the wiring from the generator to the panel, and the load assignment so critical circuits stay powered. The generator unit itself is outside our scope. The electrical connection is what we do.
A power strip with a built-in surge suppressor protects the one outlet it is plugged into. A whole-home surge protector installs at the panel and covers every circuit in the house. In an area where storm season brings frequent lightning and voltage spikes, that difference matters. Televisions, refrigerators, HVAC controls, and home office equipment are all at risk from a single surge event. The installation is straightforward: a surge protection device mounts at the main panel and intercepts voltage spikes before they reach the wiring.
An electrical safety inspection is a practical step before buying an older home, after purchasing one, or before listing a rental property. The inspection covers the panel, the wiring, the grounding, the outlets, and the condition of visible circuits throughout the property. We document what we find and explain what it means in plain terms.
Property managers and landlords use inspections to stay ahead of code issues and to confirm that a unit is safe before a new tenant moves in. Homebuyers use them to understand what a house actually needs before the purchase closes. Clear communication from the first call to the final test means you leave the inspection knowing exactly what the report covers and what the next steps are, if any.
Call now and we'll set the appointment.
When you call for a quote, we scope the job on the phone. The price is confirmed before anything is scheduled, and the rate covers what we described. What affects the cost varies by job: a panel upgrade depends on the service size, the condition of the existing panel, and the number of circuits involved. A rewire depends on the square footage, the wiring type being replaced, and the accessibility of the runs. An outlet installation is usually a shorter conversation.
We do not quote a number before we understand the job, and we do not change the scope without telling you first. Ask what the work involves and you get a straight answer.
Ready for your wiring. Call now.
Call (501) 536-6282 to get the price before we schedule.
We work throughout Conway and the surrounding communities in Faulkner County and the wider metro area. That includes Vilonia, Greenbrier, Mayflower, Wooster, Guy, and Maumelle. If you are outside Conway proper and are not sure whether we cover your address, call and ask. The answer takes about thirty seconds.
A transfer switch physically disconnects the home from the utility line before connecting the generator. Without it, generator power can feed back into the utility grid and create a serious hazard for anyone working on the lines. Every generator hookup we do includes the transfer switch or an approved interlock device as a required part of the installation, not an optional upgrade.
The generator unit itself, the sizing and the purchase, is outside our scope. What we handle is the electrical connection: the transfer switch, the wiring from the generator to the panel, and the circuit assignments that determine which loads the generator feeds. If you already have a generator or are deciding on one, call and we can tell you what the electrical side of the hookup will involve.
A surge protection device installed at the main panel intercepts voltage spikes before they reach any circuit in the house. It covers every outlet and every hardwired appliance, which is a different level of protection than a point-of-use strip. Installation is part of a panel visit or a standalone job, and it is a practical consideration for Conway homes given the frequency of thunderstorms and lightning in Arkansas.
A breaker trips when the current on a circuit exceeds its rated capacity. A one-time trip after running too many appliances at once is usually not a concern. A breaker that trips regularly under normal load, or one that trips immediately after being reset, points to an overloaded circuit, a wiring fault, or a failing breaker, all of which need a proper diagnosis rather than another reset.
An undersized or aging panel limits what circuits the home can safely carry and how much load each one can handle. Fuse boxes, which are still in service in some older Conway properties, have physical limits that make adding circuits difficult or impossible without a panel replacement. Split-bus panels from earlier decades are another type we encounter in Faulkner County homes, and both have characteristics worth understanding before any new circuits are added.
Homes built before the 1980s were wired for a fraction of the electrical load a modern household draws. Fewer circuits, lower amperage service, and no dedicated circuits for large appliances all contribute. As appliances, home offices, and electronics have multiplied, the original wiring has been asked to carry more than it was designed for. The fix depends on the specific situation, ranging from adding dedicated circuits to a full panel upgrade.
GFCI protection is required by code in kitchens, bathrooms, garages, outdoor locations, and anywhere near water. AFCI protection is required in most living spaces and bedrooms under current code. Both types of protection exist because standard breakers do not catch the specific fault conditions, ground faults and arc faults, that cause most electrical fires and shock incidents. We check both during service calls and inspections and address gaps as part of the work.
We start at the symptom and trace it back through the circuit. A dead outlet gets checked for a tripped GFCI upstream before anything else. A tripping breaker gets tested under load to determine whether the issue is the breaker, the wiring, or the devices on the circuit. A burning smell near the panel gets a visual inspection of every breaker and connection point. We identify the cause before any repair is quoted.
Outdoor wiring requires weatherproof materials throughout: exterior-rated cable, weatherproof boxes and covers, and GFCI protection on all outdoor circuits. The run length from the panel also matters, because voltage drop over a long outdoor run can affect how a fixture or outlet performs. We plan the circuit for the actual load and the actual distance, not just the nearest convenient connection point.
Permit requirements depend on the type of work and whether it is in the city of Conway or an unincorporated part of Faulkner County. For jobs that require a permit, pulling it is part of the process and the cost is factored into the quote. We confirm what applies to your address before the work is scheduled.
Clear the area in front of the panel so it is fully accessible. For outlet or switch work, move furniture, appliances, or storage that is blocking the wall where the work is happening. In kitchens and bathrooms, clear the counter near any outlet being replaced. The more accessible the work area, the faster the job goes.
There are two common approaches. A GFCI outlet can be installed in place of an ungrounded two-prong outlet and provides shock protection even without a ground wire, as long as it is labeled correctly. Running a new grounded circuit from the panel is the other option and provides full grounding. Which approach makes sense depends on how many outlets are involved and what the wiring behind them looks like.
Conway Electrical Company is available every day from 5:00 AM to 10:30 PM. Whether you are a homeowner dealing with a wiring problem, a landlord managing a rental portfolio, or a business with electrical work that needs to get done, the call starts the same way: a conversation about what the job involves and what it will cost.
Call (501) 536-6282 for a quote.
Schedule it. We wire it. You're powered.
From a tripped breaker to a full service-entrance upgrade, we handle the electrical work that keeps Conway homes and commercial properties running safely. The table below covers every service we offer in this area, who it fits best, and what is practical to know before you call. Scope is confirmed on the phone before anything is scheduled, and the price is settled before work begins.
| Electrical Service | What the Job Involves | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Backup Generator Installation |
| Faulkner County homeowners preparing for ice storms and severe weather outages | The transfer switch is the required part of any safe generator hookup. We handle the electrical connection. The generator unit itself is outside our scope. |
| Electrical Safety Inspections |
| Homebuyers, landlords, and property managers in Faulkner County | An inspection before a purchase closes gives you a clear picture of what the home actually needs, not just what is visible on a walk-through. |
| Basement & Sump-Pump Circuits |
| Homeowners finishing a basement or adding reliable sump protection | A sump pump on a shared circuit can lose power at the worst moment. A dedicated circuit keeps it isolated from other loads. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or property manager with an active electrical symptom | Tracing the fault before quoting the repair keeps the scope honest and the bill predictable. |
| Wiring & Circuit Installation |
| Any project adding circuits to an existing home | Panel capacity has to be confirmed before new circuits are run. If the panel is near its limit, that conversation happens first. |
| Whole-Home Surge Protection |
| Conway homeowners with sensitive electronics or frequent storm activity | A panel-mounted device covers every circuit in the house. A power strip covers only the one outlet it is plugged into. |
| Electrical Panel & Service Upgrades |
| Older Conway homes adding EV chargers, AC loads, or home office circuits | Arkansas summers put sustained load on panels sized for a different era. A load calculation confirms what the service actually needs before any hardware is ordered. |
| Outlet & Switch Installation |
| Homeowners adding convenience or replacing failed devices | USB outlets and AFCI-protected outlets for older bedroom circuits are straightforward add-ons during any outlet visit. |
| EV Charger Installation |
| EV owners adding a Level 2 charger at home | If the panel is already near capacity, a panel upgrade becomes part of the conversation before the charger circuit is run. |
| Older-Home Rewiring |
| Owners of pre-1980s Conway homes with original wiring | Aluminum branch circuits and knob-and-tube wiring each have specific failure modes. The approach depends on what is in the walls and how accessible the runs are. |
| Breaker & Panel Service |
| Homes with repeated trips, buzzing panels, or outdated fuse boxes | A breaker that trips immediately after reset usually points to a wiring fault, not just a tired breaker. |
| Dedicated Appliance Circuits |
| Homeowners adding large appliances or correcting shared-circuit problems | A large appliance on a shared circuit is the most common cause of nuisance trips in older Conway homes. |
| Lighting Installation |
| Homeowners upgrading interior lighting or adding outdoor security coverage | Outdoor fixtures require weatherproof boxes and GFCI protection on the circuit. |
| Wiring for Additions & Remodels |
| Homeowners finishing a basement, adding a room, or remodeling a kitchen or bath | The time to check panel capacity is before the walls go up, not after. |
| Ceiling Fan Installation |
| Homeowners replacing a light fixture with a fan or upgrading an existing fan | Mounting a fan to a box rated only for a light fixture is a common problem we find and correct before the fan goes up. |
What are the signs that a home's wiring may need to be replaced rather than repaired?
Recurring faults on the same circuit, outlets that stop working for no clear reason, wiring that is warm to the touch behind plates, and a home built before 1980 with original wiring are all worth a closer look. Knob-and-tube and aluminum branch circuits have specific failure patterns that show up differently than modern wiring problems. We map the existing circuits, identify what can stay, and explain what the replacement scope involves before any work is quoted.
What does an EV charger circuit actually involve, and does my panel need to be upgraded first?
A Level 2 charger runs on a dedicated 240-volt circuit sized for the charger's amperage draw, typically 40 to 50 amps. The circuit runs from the panel to the garage or parking area, and the panel has to have a slot and the available capacity to carry it. If the panel is already close to its limit, we scope the panel upgrade and the charger circuit as a single project. We confirm the panel's condition on the call before anything is scheduled.
How long does a panel upgrade typically take, and does the power have to be off the whole time?
A straightforward panel replacement is generally a full-day job. The utility company has to disconnect power at the meter before the panel is opened, so the home is without power during the work. We coordinate the utility disconnect as part of the process. More involved jobs, such as a service-entrance upgrade or a panel replacement combined with circuit work, may run into a second day depending on what the inspection uncovers.
Faults Traced Before Anything Is Replaced
We identify the cause of an electrical problem before we quote the repair. That keeps the scope honest and avoids replacing parts that were not the issue.
Do I need to be home while the electrical work is being done?
For most jobs, yes. Access to the panel, the attic, the crawl space, or specific rooms is usually required, and having someone available to answer questions about the scope as the work progresses keeps things moving. For rental properties, a property manager or designated contact works the same way. We confirm access requirements on the call when the job is scoped.
What is the difference between aluminum wiring and knob-and-tube wiring, and are both a concern?
They are different problems. Aluminum branch wiring, common in homes built in the 1960s and 1970s, expands and contracts more than copper and can loosen at connections over time, which creates heat and arcing risk. Knob-and-tube wiring, found in earlier homes, lacks a ground wire and was never designed for the loads a modern household draws. Both require a careful assessment rather than a blanket replacement. What is actually needed depends on the condition of the wiring and how the circuits are being used.
What does grounding and bonding mean, and why does it matter in an older home?
Grounding gives fault current a safe path back to the panel and out to the utility, which is what trips the breaker when something goes wrong. Bonding connects metal components, pipes, and equipment so they stay at the same electrical potential and do not create a shock hazard. Older homes often have ungrounded circuits or bonding that was never completed to current standards. We check both during inspections and address gaps as part of any relevant repair or upgrade.
Permits and Inspection Handled Where Required
For jobs that require a permit in Conway or Faulkner County, pulling it is part of the process. We confirm what applies to your address before work is scheduled.
How are emergency electrical faults handled, and what should I do if I smell burning near an outlet or panel?
If you smell burning near an outlet or the panel, stop using the circuit if you can identify it, and call us. We are available every day from 5:00 AM to 10:30 PM. A burning smell near electrical equipment points to a wiring fault or a failing connection, and it is not something to wait on. We ask the right questions on the call to determine how urgent the situation is and what the visit needs to cover.
What does it mean when lights dim or flicker when a large appliance turns on?
A momentary dip when a motor starts, like a refrigerator compressor or an air conditioner, is normal to a point. Lights that dim noticeably, stay dim, or flicker repeatedly point to a circuit that is being asked to carry more than it was designed for, a loose connection, or a panel that is running close to its capacity. We trace the symptom back through the circuit and give you a plain answer on whether the fix is a dedicated circuit, a connection repair, or a panel conversation.
Older and Newer Wiring Both Handled
From knob-and-tube and aluminum branch circuits to modern panel work and EV charger installs, we handle the full range of residential wiring in this area.
When is adding a subpanel a better option than upgrading the main panel?
A subpanel makes sense when the work is concentrated in a specific area, like a detached garage, a workshop, or an addition, and the main panel has enough capacity to feed it. Rather than running individual circuits back to the main panel from a distant location, a subpanel puts the breakers close to the load. If the main panel is already undersized, the upgrade happens there first. We scope both options on the call and explain which approach fits the job.
What is the risk of warm or buzzing outlets, and when should I stop using one?
A warm outlet or a buzzing sound from a switch or outlet usually points to a loose connection, an overloaded circuit, or a failing device. Both are worth taking seriously. Stop using the outlet if it feels warm to the touch, and do not plug high-draw appliances into it until it has been checked. A buzzing sound from a breaker or the panel is a separate concern and warrants a call without delay.
How do I know if my home is ready for added electrical load, like a new appliance or a home office setup?
The starting point is the panel. A panel with open slots and available amperage can usually absorb a new dedicated circuit without much trouble. A panel that is already full, or one that is undersized for the service entrance, needs to be addressed before new load is added. We check the panel's current state on the call and tell you what the capacity situation looks like before anything is scheduled.
Call (501) 536-6282 to talk through the job, get a price, and get it on the schedule.
(501) 536-6282