Some electrical jobs get planned. A homeowner decides to add recessed lighting to a finished basement, a landlord wants dedicated circuits run before a tenant moves in, a business owner schedules an inspection before a renovation kicks off. Those calls come in days or weeks ahead, and we plan the work accordingly.
Other calls come in the same morning something stops working. A breaker that will not reset, an outlet that went dead overnight, a panel that smells like it is burning. We take those calls too, every day from 5:00 AM to 10:30 PM. Whatever the situation in Heber Springs, the first step is the same: a call that gets the problem on the table before anything else happens.
The rate for electrical work depends on what the job actually involves, and that means the conversation on the phone matters. We ask about the symptom, the age of the wiring, and what the panel looks like. Most of the time that is enough to give you a number before we schedule anything.
What moves a quote in one direction or another comes down to a few things. What the fault turns out to be once the circuit is traced. What has to be opened up to reach it. Whether the existing panel can carry the change being asked of it, or whether a load calculation points to a service upgrade before new circuits are added. None of those are surprises if we have the right conversation first.
You get the price on the phone. If the scope changes once we are on site, that conversation happens before the additional work does. Ask what the work involves and you get a straight answer.
Not every electrical problem starts on your side of the meter. A utility fault, a failed transformer, a damaged service drop, these all produce symptoms that look like an internal wiring problem from inside the house. Half the lights out, voltage that runs low and makes appliances behave strangely, a section of the house that goes dark without a tripped breaker. Any of those could be the utility.
When a fault is reported, we start at the meter and work inward. The service entrance, the main disconnect, and the panel all get checked before we trace further into the home's circuits. If the evidence points to the utility side, we tell you that clearly and explain what to report to the utility company.
If the fault sits on their side of the meter, the utility is responsible for the repair. What we can do is document what we found, confirm that your panel and service entrance are in good shape, and make sure nothing on your side contributed to the problem. That way, when the utility restores power, the system comes back up correctly.
We service this area, and its neighborhoods each have their own wiring. Older homes on original circuits, outbuildings that were wired informally, additions where nobody documented what was run, properties that have been through several owners and several rounds of changes. The jobs below describe the situations that lead to a call, not just the names of the work.
Low-voltage work covers the wiring that runs doorbell transformers, structured data cabling, and the circuits that feed smart-home devices and security panels. In older Heber Springs homes, doorbell wiring is sometimes the original run from decades back, and it fails quietly. Data rough-in is a common request during renovations, when walls are open and the right time to run clean cabling is before the drywall goes back up.
A panel that runs out of capacity, holds breaker types that are no longer supported, or shows signs of heat damage needs to be replaced rather than patched. Breaker replacement on its own is appropriate when a single breaker fails but the panel is otherwise sound. The difference matters for cost and for how long the work takes. We confirm which situation applies before quoting either.
Adding recessed lighting to a room that has never had it means running new circuits, installing rated boxes, and confirming the panel can carry the added load. LED retrofits in existing cans are a shorter job but still involve checking the fixture rating and the dimmer compatibility. In either case, the wiring behind the wall matters as much as the fixture in front of it.
Grounding and bonding are two separate things that work together. Grounding connects the electrical system to the earth so fault current has a safe path. Bonding connects metal components, pipes, and enclosures so they all sit at the same voltage potential. Older homes in this area sometimes have neither done to current standards, and the correction involves more than adding a ground wire to an outlet. We assess the full system before recommending what needs to change.
Rural properties around Heber Springs commonly run well pumps on dedicated circuits. A well pump draws significant startup current, and a circuit that was not sized for it will trip under load or run the pump at reduced voltage over time. Irrigation systems have similar requirements. We size the circuit for the actual load, confirm the panel can carry it, and run the wiring correctly for an outdoor or underground application.
A full rewire is the right answer when the existing wiring type creates a safety concern across the whole house, or when a home insurer requires it as a condition of coverage. Partial rewiring addresses a specific section of the home, a single floor, a wing added at a different time, or circuits that were run informally and never brought to code. Both start with an assessment of what is in the walls and what the finished system needs to support. Arc-fault and ground-fault breaker protection is addressed as part of any rewire, not as an afterthought. Where a Heber Springs job fits is easier to see on the services page.
Out-of-hours scheduling is a practical option for commercial work where the business cannot go dark during operating hours. A retail space, a restaurant, a medical office, these are not situations where the power can simply be shut off for a day. We plan the work in phases, confirm which circuits can be isolated without affecting the rest of the building, and schedule the parts that require a full shutdown for times that fit the operation.
The planning conversation is different for commercial work. Load calculations, panel capacity, the way the building is metered, and which circuits feed critical equipment all have to be mapped before the job starts. A circuit addition that looks straightforward in a house is a different scope in a commercial panel with multiple disconnects and a mix of 120-volt and 240-volt loads. We scope it correctly on the front end so the work does not stall once it starts. Clear communication from the first call to the final test is how that process runs.
Urgent faults get treated as urgent. A burning smell near the panel, an outlet that sparks, a breaker that will not hold, these are not situations to put on a waiting list. When you call with a fault that cannot wait, we take the details on the phone, confirm what is needed, and work out the earliest opening the schedule allows.
For tenanted properties and businesses that have to stay open, the work gets planned around the occupancy. That might mean isolating the affected circuit while the rest of the property stays live, or scheduling the shutdown portion of the job outside operating hours. We confirm what will be off and for how long before anyone shows up, so the tenant or the business can plan around it.
We are open every day from 5:00 AM to 10:30 PM.
Call (501) 536-6282 and describe what is happening.
We give you the rate and confirm availability on the same call.
We cover Heber Springs and the communities around it throughout Cleburne County. That includes Tumbling Shoals, Wilburn, Greers Ferry, Drasco, and Higden. If you are outside the town proper and are not sure whether your address falls within our reach, a quick call answers it.
Rural properties in this part of the county often involve longer runs from the panel, outbuildings on separate circuits, and well pump wiring that was installed at a different time from the main house. We take those jobs the same as any other. The scope is confirmed on the call before anything is scheduled.
Pool pumps, lighting, and associated equipment need dedicated circuits, proper grounding and bonding, and GFCI protection. The disconnect placement and the wiring materials are governed by code requirements for wet locations. We handle the circuit work, the disconnect, and the grounding. The pool equipment itself is not something we install or service.
Rural properties in this part of the county often involve well pump circuits, outbuildings on separate or informal wiring, and homes that have been added to over the years without a full circuit map. When we scope a job here, we ask about the property layout and the age of the wiring, not just the symptom. That changes what we bring and how we plan the visit.
When a service upgrade involves the meter or the service entrance, the utility has to be notified and may need to disconnect and reconnect power at the meter. We handle the coordination on the electrical side and confirm what the utility requires for your address when we scope the job.
Yes. If you are not sure whether a repair, an upgrade, or a full rewire is the right move, call and describe the situation. We can tell you what the options look like and what the work would involve so you can make an informed decision. The call does not commit you to anything.
Whatever brought you to this page, whether it is a fault that showed up this morning or a project you have been planning for weeks, we handle it.
Call Conway Electrical Company at (501) 536-6282 for a quote.
We are available every day from 5:00 AM to 10:30 PM. Schedule it. We wire it. You're powered.
Electrical work in the surrounding towns: Searcy, Clinton, Greenbrier, Beebe.
Browse our coverage area list.
From a tripped breaker to a full service-entrance upgrade, we handle the electrical work that keeps Heber Springs homes and commercial properties running safely. The table below covers every service we offer in this area, who it fits best, and what is practical to know before you call. Scope is confirmed on the phone before anything is scheduled, and the price is settled before work begins.
| Electrical Service | What the Job Involves | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Wiring & Circuit Installation |
| Any project adding circuits to an existing home | Panel capacity has to be confirmed before new circuits are run. If the panel is near its limit, that conversation happens first. |
| Electrical Panel & Service Upgrades |
| Older Heber Springs homes adding EV chargers, AC loads, or home office circuits | Arkansas summers put sustained load on panels sized for a different era. A load calculation confirms what the service actually needs before any hardware is ordered. |
| Older-Home Rewiring |
| Owners of pre-1980s Heber Springs homes with original wiring | Aluminum branch circuits and knob-and-tube wiring each have specific failure modes. The approach depends on what is in the walls and how accessible the runs are. |
Call (501) 536-6282 to talk through the job, get a price, and get it on the schedule.
(501) 536-6282